First time configuration

When running the first time the application, you will have to configure it. For this purpose, a wizard is runned.

tutorial-1

Step 1

At this point the location should be automatically determined.

If you are satisfied with the location, you can press Nextand skip to Step 3. If you think that the location is incorrect, you can continue with Step 2.

tutorial-2

Step 2

First, if the problem comes from you internet connection, you can retry to reconnect in order to retrive the location from internet.

tutorial-3

Step 2-1

If it does not correspond to you location or you do not have internet access, just check the corresponding message and press Next.

tutorial-4

Step 2-2

You have to choose manually your location from this page.

tutorial-5

Step 2-3

An example is present below, after choosing a location, press Next.

tutorial-6

Step 3

In this page, you can choose your preferred calculation method along with the Asr calculation.

This configuration is prefered to leave by default unless you know what you are doing.

tutorial-7

Step 3-1

In case you forgot the default configuration, you can retrive it by pressing the Default button. When you are satisfied, you can press Next.

tutorial-8

Step 4

You are all set, congratulation. Just press “Finish”.

tutorial-9

Application home page

tutorial-10

tutorial-11

Continue this tutorial to know how to configure the application.